CAMCT
SS-M2 Straight-through two-valve block
SS-M2
Overview
The cylindrical stop valve is used for the installation of the transmitter with a threaded interface to control the opening or closing of the transmitter pressure, and can also be used for pressure discharge
Product Detail
Valve block introduction
Valve group is mainly used for opening, closing, pressure balancing and discharging of input signals of differential pressure/pressure transmitter and flow transmitter, which is convenient for online installation, maintenance and inspection of instruments.
Manifold features
Safety stop pin
Stainless steel pins are used to prevent the seat from vibrating away from the body
Valve body design
Integrated structure, high strength, high reliabilitySeat seal
Hard seal between stainless steel, safe and reliableValve core
The valve core assembly adopts a sectional structure, so that the sealing performance and the service life of the valve group are improved, and the operability of the handle is also improved.Grease
The imported lubricating grease is used between the sealing washer and the adjusting screw to reduce the friction and improve the sealing performance.Flexible installation
Plate, flanged, direct mounting, 1/2 NPT connection to pipeStructural material
SUS316、SUS304、SUS321、 HC-276 etc.Marking cover
The stop valve, balance valve and blowdown valve are marked with blue, green and red, fresh and naturalSeal packing
PTFE, graphiteWork pressure
16MPa,32MPaOperating temperature
-40~ 150℃( － 40~302。F)
- Service Time
- Weekday
- AM 9:00 ~ PM 6:00
* Every call from you is very important to us, looking forward to your call.
